Tube Expanders
STESB SERIES
- Sugar
Top Plate tube expansion in pans and juice heaters within sugar mills. Size range from 1.1/2″(38.1mm) to 4.1/2″(114.3mm)
STECSB SERIES
- Sugar
Bottom plate tube expansion in pans and juice heaters within sugar mills. Tube size 1.3/4″(44.5mm)x4″ (101.4mm) O.D. where access to the bottom is restricted.
STE114 SERIES
- Boilers
The STE114 series are general purpose expanders for expanding and flaring boiler tubes, waterwall economiser, riser and airheater tubes.
Tube sizes 2″ (50.8mm) -4.1/2″ (114.3mm) O.D.
Tube sheet 1/2″ (12.7mm) -2.5/8″ (66.7mm) thickness
STEAF 3 SERIES
- Boilers
The STEAF 3 series is a cost efficient tool used in applications where only a small number of tubes require expanding with flaring.
Tube sizes 7/8″ (22.2mm) -4.1/2″ (114.3mm) O.D.
Tube sheet 1/2″ (12.7mm) -2.5/8″ (66.7mm) thickness
STEA SERIES
- Boilers
The STEA series is a cost efficient tool used in applications where only a small number of tubes require expanding without flaring.
Tube sizes 7/8″(22.2mm)-4.1/2″(114.3mm)O.D.
Tube sheet 1/2″(12.7mm)-2.5/8″(66.7mm) thickness
STEABF 3 SERIES
- Boilers
The STEABF 3 series is a high productivity tool designed with a thrust assembly where flaring is required.
Tube sizes 2″(50.8mm)-4.1/2″(114.3mm) O.D.
Tube sheet 1/2″(12.7mm)-2.5/8″(66.7mm) thickness
STEAB SERIES
- Boilers
The STEAB series is a high productivity tool designed with a thrust assembly where flaring is not required.
Tube sizes 2″ (50.8mm) -4.1/2″ (114.3mm) O.D.
Tube sheet 1/2″ (12.7mm) -2.5/8″ (66.7mm) thickness
STEAB SR SERIES
- Boilers
The STEAB SR series is a high productivity tool designed for thick tube sheets where flaring is required
Tube sizes 2″ (50.8mm) -4.1/2″ (114.3mm) O.D.
Tube sheet 1.1/2″ (38.1mm) -4″ (101.6mm) thickness
STEAB LR SERIES
- Boilers
The STEAB LR series is a high productivity tool designed for thick tube sheets where flaring is not required
Tube sizes 2″ (50.8mm) -4.1/2″ (114.3mm) O.D.
Tube sheet 1/2″ (12.7mm) -3″ (76.2mm) thickness
STEV SERIES
- Boilers
STEV series expander is used for repair and building of boilers with thin tubes, approximately as fast as conventional tube expanders.
Tube sizes 1″ (25.4mm) -3″ (76.2mm)
STECBE SERIES
- Boilers
STECBE series combines beading and expanding in one operation reducing individual operations and increasing the effciency of the operator.
Tube sizes 1″(25. 4mm)-3″(76.2mm)
EXPANDERS SPECIALISED FOR REFINERIES
- Refineries
Tube expanders tor use in refineries are often specifically size designed to suit particular applications. specifying the tube size, tube sheet size and configuration (drawing if available), in order for the correct expander to be manufactured.
STE900 SERIES
- Heat Exchanges
- Condensers
STE900 series for small tubes
Tube sizes 1/2″ (12.7mm) to 1.1/2″ (38.1mm) O.D.
Tube sheets 1/2″ (12.7mm) to 2.1/4″ (57. 2mm) thickness
STE800 SERIES
- Heat Exchanges
- Condensers
STE800 series tube expander available in three and five roller versions
Tube sizes 1/2″ (12. 7mm) -1.1/2″ (38.1mm) O .D.
Tube sheets 1/2″ (12.7mm) -2.1/4″ (57.2mm) thickness
STE1300 SERIES
- Heat Exchanges
- Condensers
STE1300 series
Tube sizes 3/8″ (10mm) O.D.
Tube sheets 3/4″ (19mm) to 3.3/4″ (95.3mm) thickness
STE1200 SERIES
- Heat Exchanges
- Condensers
STE1200 series for small tubes available in three and five roller versions
Tube sizes 1/2″ (12.7mm) to 1.1/2″ (38.1mm) O.D.
Tube sheets 1/2″ (12.7mm) to 2 .1/4″ (57.2mm) thickness
STE AL SERIES
- Heat Exchanges
- Refineries
STE AL series
Tube sizes 5/16″ (7.93mm) to 1.5/8″(41.3mm) O. D.
Tube sheets 5/8″ (15.9mm) to 1″(25.4m) thickness
STES SERIES
- Heat Exchanges
- Refineries
STES series
Tube sizes 1/4″ (6 3mm) to 3/8″ (10mm) O. D.
Tube sheets 3/4″ (19mm) to 1.1/4″ (31.75mm) thickness